Skip to main navigation Skip to main content Skip to page footer
Logo Solar Electric
KOSTAL PLENTICORE & Dyness Tower Pro

The harmonious duo for private households and commercial facilities

More energy and possibilities with KOSTAL PLENTICORE and Dyness Tower Pro

The Dyness Tower pro battery storage system is suitable for use in private households and commercial enterprises. Thanks to its stackable design, it can be flexibly expanded and is easy to install.

PLENTICORE G3 and Dyness Tower Pro: Flexible energy miracles

The Dyness Tower Pro is a flexibly scalable high-voltage battery storage system that works perfectly with KOSTAL PLENTICORE G3 inverters. The modular design enables the customisation of two to six battery modules and thus offers up to 23 kWh of fully usable capacity (100% DoD). This makes the Tower Pro perfect for larger photovoltaic systems and increasing energy requirements, for example through e-mobility (with the KOSTAL ENECTOR Wallbox) or heat pumps.

Thanks to modern LiFePO₄ technology, you benefit from a long service life and a high level of safety. The maximum power draw depends on the PLENTICORE G3 inverter used: up to 7 kWh for the S model, up to 10.5 kWh for the M model and even up to 17.3 kWh for the L model - with a corresponding charging/discharging current of 17 to 30 amps. Rely on an intelligent, future-proof storage solution for maximum independence from the power grid.

By the way: The PLENTICORE G2 is also compatible with the Dyness Tower Pro. You can find the relevant data in this data sheet.

Technical details of the Dyness Tower Pro

The Dyness Tower Pro is a modular, stackable battery system for private and commercial use. The installation is extremely space-saving and service-friendly. Thanks to the intelligent modular principle, you can flexibly expand the storage system as the energy requirements of your home or business increase.

  • Technology: High-quality, long-life LiFePO4 cells with > 6,000 charging cycles
  • Capacity (gross): 7.7 - 23.0 kWh, usable >95% (DoD)
  • Nominal voltage: 192 - 576 V, depending on configuration (2-6 modules)
  • Dimensions: Height: 788 - 1672 mm (depending on module arrangement), width: 587mm, depth: 310mm
  • Weight: 99.5 - 241 kg (fully equipped)
  • Max. charging/discharging current (battery): 40/40 A
  • Expandable up to 6 modules (TP23)

Special feature: Communication with the inverter takes place via RS485, which guarantees maximum reliability and future-proof system integration.

Installation and operation:
The compact and stackable modules allow easy adaptation to almost any technical room. Subsequent upgrades are possible without any problems - optimum future-proofing if the energy demand grows (e.g. through heat pumps or e-mobility).

With above-average cycle stability and high depth of discharge, the Tower Pro systems are among the most efficient, safest home storage systems on the market.